Led Flood Light Factory Shares The Solution That Led Floodlights Are Not Lit
Today, Led Flood Light Factory will share how to properly handle LED floodlights.
First check if the headlight bulb is shorted. If the lamp is OK, check the fuse and control the line switch.
A look: open the lamp cover to see if the front of the bulb and the entire bulb are black. If it is black, replace it immediately. If the bulb is still not lit, replace the trigger (mostly the bulb and the trigger burn out). When the sodium lamp is just starting up, it is seen that the bulb is white or green, indicating that the bulb has aged, causing periodic ignorance and need to be replaced.
Second listening: I heard the humming sound, that is, the discharge sound from the ballast to the lamp socket, indicating that there is something wrong with this line, check whether the wire head and the lamp socket are short-circuited, and whether the shrapnel in the lamp mouth is in good contact with the bulb contact. If the sodium lamp is not lit after the fault is removed, and there is a buzzing sound, the domestic and imported sodium bulbs, triggers and ballasts are not compatible, and the same specifications will be bright.
Sanwen: Judging whether the ballast is broken, if there is no obvious burnt mark, if the ballast smells burnt, it means that the ballast has burned out and needs to be replaced.
information about Led Flood Light Factory : https://www.cpclighting.com/
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: Assam|
Target City : Ningbo
Last Update : 30 April 2019
Number of Views: 26
|Item Owner : Cpcbeta|
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|