Machine Structure Of Centrifugal Barrel Finishing Machine (Automobiles & Vehicles - Auto Loan)

INNetAds > Automobiles & Vehicles > Auto Loan

Item ID 1302804 in Category: Automobiles & Vehicles - Auto Loan

Machine Structure Of Centrifugal Barrel Finishing Machine


Centrifugal Barrel Finishing Machine The frequency control function is installed on the machine control panel. The working speed of the machine can be adjusted at any time, so the defect rate is reduced for the processed workpiece. The drum can realize forward rotation and reverse rotation, and can control the position of the drum on the control panel, which is convenient and flexible in operation.

Centrifugal Barrel Finishing Machine can be divided into chain-driven and synchronous belt-driven according to the transmission mode. The grinding container drum is made of extremely wear-resistant, acid-resistant PU glue as the inner lining. If the drum is damaged due to long use time, the grinding drum set can be replaced at any time without affecting the normal operation of the entire centrifugal grinder, so that the machine greatly improves work efficiency.

Centrifugal Barrel Finishing Machine's machine structure: The machine is equipped with four hexagonal drums, automatic dumping mechanism, base and electronic control system. Mechanical operation principle: Four hexagonal drums are installed on the large turntable of the machine. The planetary synchronous belt wheel group drives the drum and the large turntable to form a reverse rotation, so that the abrasive and the workpiece in the drum are generated by the double centrifugal force. Strong friction. It can efficiently finish the polishing speed of the workpiece. When it is working, the large turntable brake motor is driven and controlled by the inverter. Using the principle of centrifugal motion, the polishing efficiency of the workpiece is improved. Moreover, the polished workpiece has high precision, high brightness and no bruise. It is especially suitable for the finishing of small and medium-sized workpieces, and the polishing of workpieces with shaped cavities and heat treatment.

The external design of the scientific machine: welded by steel plate and channel steel, the drum turntable assembly is fixed on the machine base, and the arc-shaped protective cover is installed on the upper part of the work roll, and the front part of the protective cover can be opened and closed freely. Turn off the protective cover while working to open the machine for work. Reasonable layout design of the machine body: Under the premise of not reducing the working volume, the smaller size of the machine design allows the user to save space.


information about centrifugal barrel finishing machine : https://www.zhongyun-machine.com/product/


Related Link: Click here to visit item owner's website (0 hit)

Target State: Bihar
Target City : Huzhou
Last Update : 28 May 2019
Number of Views: 20
Item  Owner  : machineunique
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
INNetAds > Automobiles & Vehicles > Auto Loan
 © 2019 INNetAds.com
2019-06-27 (0.081 sec)